Our siding prices page contains great links to comparison pricing, different materials as well as manufacturers pricing pages.
Have questions about your vinyl siding project, send us an email and ask away!
Bill – Site Editor
General Articles On Siding Prices
Average Cost Of Different Materials – The average cost of vinyl ranges from $0.50 to $3.50 per sq. ft. for the product itself. Installation typically ranges from $1.00 – $2.00 a sq. ft. This means a total price tag range of $1.50 to $5.50 psf installed.
Siding Cost Estimator – Our cost estimator can help you get a rough estimate of your home project. Simply fill in your specifics on our cost estimator and find your ballpark pricing.
Installation Cost – This will run from $1.00 – $6.00 per sq. ft. The main factors affecting price are materials; vinyl panels are much easier to install than fiber cement, which is heavy and difficult to cut.
Price Comparison – Get a general idea of house cladding costs, although there will be variation within each type from the low end to high end grades. Our pricing comparisons are for 2010 prices and is an average price for both materials and a contractor installation.
Vinyl Siding Installation Cost – This will typically range from $1.00 – $2.00 per sq. ft., although complex jobs can sometimes cost $3.00 psf. There are numerous factors that affect installation cost…
Siding Prices By Type And Style
Aluminum Pricing – These will range from $5.00 to $8.00 per square foot for both materials and installation. Costs vary based on many factors, including removing existing cladding, demo, disposal, framing prep work, flashing, quality of product used, geographic location, etc.
Barn Siding Prices – will range from $4 to $12 per square foot fully installed, which is a huge price difference that reflects, to a large extent, the large range in barn panel costs. In general, barn siding can make for an amazing home improvement project.
Beveled Wood Prices – These will range from $4.00 to $7.00, which includes both the product and installation. Beveled wood comes in a variety of options, made out of different types of wood. Depending on the type of wood you choose and the quality of the grade of the wood, there is an option to fit any budget.
Board And Batten Costs – This will run from $3.50 to $6.00 per square foot for the materials and professional installation. The biggest cost factor will be materials, with 12″ cedar boards and 3″ cedar battens being at the top end of pricing and a standard pine being at the lower end.
Brick Siding Cost – Expect to pay anywhere from $6.00 to $12.00 per sq. ft. for materials and professional installation. Brick is certianly on the high end of the cost spectrum. The reason is primarily due to the weight of the material, which can mean expensive reinforcements made to the framing of a home’s structure.
Brick Veneer Cost – This ranges in price from $6.00 to $13.00 per sq. ft. – this includes product and installation. The high end brick veneers are very realistic, while lower end products are can look unprofessional.
Cedar Siding Prices – These range from $3.50 to $6.50 per square foot. This includes the material and professional installation. Cedar is fairly simple to install and lasts up to 20 years. Unlike vinyl products, cedar does require maintenance to protect the wood.
Cedar Lap Prices – These range from $3.50 to $6.50 per foot. This price is for both the material and some form of professional installation. Cedar is relatively easy to install and is a beautiful cladding option that lasts for 15-20 years.
Cedar Shake Siding Cost – These range from $3.50 to $6.50 per square foot. This includes the product and professional installation. Cedar is fairly simple to install and lasts up to 20 years. Unlike vinyl products, cedar does require maintenance to protect the wood.
Cedar Shingle Cost – These range from $3.50 to $6.50 per square foot. This includes the material and professional installation. Cedar is fairly simple to install and lasts up to 20 years. Unlike vinyl products, cedar does require maintenance to protect the wood.
Clapboard Cost – These can range from $3.25 to $6.00 per sq. ft., which includes installation and materials. The large price range due mainly to the grade and type of cladding material that the consumer chooses.
Composite Wood Pricing – How much does this cladding cost? Expect to pay anywhere from $4.00 to $6.50 per sq. ft. — this includes both materials and the installation.
Price For Concrete Cladding – This will run $5.00 – $10.00 per square foot installed. While this term is often thought to be synonymous with fiber cement , it can actually refer to a variety of cladding materials such as stucco, concrete boards, mortarless masonry or brick veneer.
Engineered Wood Costs – Engineered wood is typcially stronger than traditional wood cladding, allowing for wider spaces between joists, which saves on material. In fact, it takes approximately 33% less lumber to create the same amount of engineered wood as with standard wood options.
Fiber Cement Siding Cost – This will run $5.00 – $10.00 per square foot installed. Find costs and prices broken down by material and installation.
Insulated Vinyl Cost – Expect insulated vinyl prices to be, on average, $450 per sq. ft. – which is 25-30% higher than standard vinyl. This price is for both materials and installation.
Lap Siding Cost – This can range from $3.25 to $8.00 per sq. ft. installed (both materials and installation). Lap tends to be more expensive than traditional vinyl, although less than stone or fiber cement.
Log Siding – On average, these range from $4.75 to $10.50 per square foot for both the logs themselves as well as installation. The type of wood used in the log cladding will obviously affect…
Shake – These will range in cost from $3.00 to $6.00 psf installed. This range is identical to shingles and is in the mid range of all cladding materials.
Shingle Pricing – This will range from $3.00 to $6.00 per sq. ft. installed. It is similar in price to cedar shingle, although a bit less expensive for materials such as pine or spruce. The materials are relatively easy to install and the total price tag is in the mid range of all cladding materials.
Steel Siding Prices – These can range from $6.00 to $10.00 psf installed. This cladding can add real distinction to a home and can last 40 years or more. The price tag is certainly more than more vinyl products, but it is a strong and durable cladding whose overall appearance has real appeal for many homeowners.
Vinyl Cedar Shake Cost – This ranges from $4.50 to $7.50 per square foot – this includes both material and professional installation. Pricing will vary by the type of vinyl cedar shake you choose such as hand split, rough-cut, staggered or scalloped.
Vinyl Shake Prices -This will range from $4.50 to $7.50 psf installed. This cost range covers the product and some form of professional installation. Prices will vary according to a number of factors that include the overall grade of product you use, manufacturer and level of project difficulty.
Vinyl Shingle Costs – This will be somewhere in the negiborhood of $3.00 to $6.00 psf. This covers the price of materials and installation from a professional contractor. Several of the issues that will affect the per square foot price include the grade of the materials, the amount of prep work need and level of difficulty on the install.
Vinyl Siding Cost – When it comes to exterior home cladding, vinyl costs less than most other options such as brick, stone, stucco or wood. Determining the costs is comprised of a combination of the product price and the installation cost.
Vinyl Pricing – Typically, vinyl ranges from about $0.50 to $3.50 per square foot for the material alone, with installation usually falling in the range of about $1.00 – $2.00 per square foot. This brings the total to $1.50 to $5.50 per square foot to install this type of cladding on your home.
Wood Siding Costs – Expect to pay $3.25 to $8.00 psf for materials and installation. Wood is a popular cladding that is attractive, natural looking and lasts for many years when properly cared for. While it is costs more than vinyl, it is certainly less costly than a stone or brick.
Siding Prices By Manufacturer
CertainTeed Siding Prices – We have put together a partial list of costs for the different product lines. The top section list material costs only, followed by general installation pricing and then a price list for many of the options.
Crane Prices – Discover Crane prices from past customers and find an overall range of prices from this company.
Hardie Board Cost – This product ranges from $5.00 to $12.00 for materials and professional installation. Hardie board, or Hardie plank (the official product name), is the most popular fiber cement product.
Mastic Prices – These are general prices that a contractor might charge for a 1 to 2 story home and do not include the cost for removing existing material, install soffits, fascia, gutters etc.
Nichiha Siding Cost – These can range anywhere from $5.00 to $8.00 for the installation and the product itsefl. Their products comes in a variety of products and options depending on your project needs.
Variform Prices – Browse for a general breakdown of material and installation pricing, as well as totals that homeowners can expect for your next project. All prices are from 2011.